action= | Explanation | Parameters |
---|---|---|
defreeze | Unfreezes the camera after Terminate Recording (TR) occurred and resumes recording. | |
delete_reference_image | Delete current reference image. | |
delete_system_messages | Delete and reset all system messages. Only available as administrator. | |
emailcurrent | Sends the current image by e-mail using the e-mail profile specified by id or name. |
|
emaillastevent | Sends the last event image by e-mail using the e-mail profile specified by id or name. |
|
eventack | Acknowledges an event. | |
format_device | Format flash device with MxFFS-Volumes for Recording and or MxAnalytics. |
|
ftpcurrent | Sends the current image to the FTP server using the FTP profile specified by id or name. |
|
ftplastevent | Sends the last event image to the FTP server using the FTP profile specified by id or name. |
|
generate_reference_image | Save current image as reference image. | |
getrs232 | Prints text received from the RS232 interface. |
|
getrs232hex | Prints text received from the RS232 interface in hex notation. |
|
gettemp | Gets the camera's internal temperature. | |
gettext | Replace MOBOTIX variables in message and print it as plain text. |
|
irledsoff | Switches all infrared LEDs off. | |
irledson | Switches all infrared LEDs on. The optional time parameter switches the LEDs off after the specified number of seconds. |
|
irledsstring | Switches the infrared LEDs specified in the leds parameter. If no string is specified, the IR LEDs will be switched to default. The optional time parameter switches the IR LEDs off after the specified number of seconds. |
|
isdnhangup | Disconnects all ISDN dial-out connections (no profile specified) or the one with the name specified by id or name. |
|
isdnphone | Triggers ISDN call-out using the profile specified by id or name. |
|
ledsdefault | Switches LEDs to default. | |
ledsoff | Switches all LEDs off. The optional time parameter switches the LEDs back to default after the specified number of seconds. |
|
ledson | Switches all LEDs on. The optional time parameter switches the LEDs back to default after the specified number of seconds. |
|
ledsstring | Switches LEDs specified in the leds parameter. If no string is specified, the LEDs will be switched to default. The optional time parameter switches the LEDs back to default after the specified number of seconds. |
|
list_plex_recording_targets | Lists the event recording targets provided by supported expansion devices. Set the output parameter to media_types to retrieve the list of supported media types instead. |
|
mailboxdb_delete | Will delete an entry from the mailbox db, only. It will not erase the actual recording on the event storage.The concrete message has to be given by its sequence and event number. |
|
mailboxdb_reset | Delete all entries in the mailbox database! Only available as administrator. | |
mailboxdb_set_seen_flag | Allows to change the "seen flag", whether a message has been reviewed, for the message given by its sequence and event number. This has to be followed by the flag value. Zero (0) is for unseen messages. Other values for seens messages. |
|
mxffs_archive_delete | Delete MxFFS archive files on the file server, and reset current transfers and statistics! Attention: you will loose all archived recordings immediatly! Only available as administrator. | |
mxffs_archive_reset_tq | Reset all queued MxFFS archive transfers. Only available as administrator. | |
mxffs_archive_reset_stats | Reset MxFFS archive statistics. Only available as administrator. | |
notifycurrent | Sends a network message (IP Notify) with the status of the current image. |
|
notifylastevent | Sends a network message (IP Notify) with the status of the last event image. |
|
pancenter | Sets the pan position to the center of the current view. | |
prepare_format | Prepare format of storage targets. DISABLES RECORDING on selected target or all usb, sd and cf - devices and reboots the camera, if necessary to format. |
|
putrs232 | Sends text specified in the rs232outtext parameter to the RS232 interface. |
|
reboot | Reboots the camera; only available as Administrator. | |
recording_targets_info | Shows information about available recording targets. With check option it tests for newly connected hardware. |
|
resetconfig | Resets the configuration to factory defaults; only available as Administrator. | |
resetsmsaccounting | Reset the SMS accounting values. | |
restoreconfig | Restores the current configuration from flash; only available as Administrator. | |
rs232sigin | Prints status of the signalin pin of the serial interface. | |
scanzeroconf | Scans for MOBOTIX cameras with Zero Configuration Networking enabled. Scan time is set through parameter time. Default scan time is five seconds. |
|
sendmessage | Sends the message specified in the message parameter to the address specified in the addr parameter. |
|
set_plex_recording_target | Reconfigures event recording to use a specified target on an expansion device. Either specify the target directly via the target parameter, or indirectly by requesting a specific media_type such as cf, sd or usb. Then store to flash and reboot in order to activate changes. |
|
set_plex_recording_target_and_reboot | Same as set_plex_recording_target. Additionally the new configuration is stored into flash and the camera reboots. |
|
settime | Sets the current system time. The time is given in seconds since epoch. If in client mode a resync to the time server is performed, and the time parameter is optional in this case. |
|
sigout | Triggers the signal out profile as specified using the profile parameter. |
|
smsalert | Sends Alert-SMS according to the specified profile. |
|
sound | Play back a given sound profile or sound file. If both are given, the former takes precendece over the latter. |
|
speakip | Outputs the camera's current IP address on the speaker. | |
storeconfig | Stores the current configuration to flash; only available as Administrator. | |
userclick | Triggers a User Click (UC) event. | |
voipcall | Triggers VoIP call-out using the sip address specified in the sipaddr parameter. |
|
voiphangup | Hangs up VoIP call-out. | |
voipphone | Triggers VoIP call-out using the profile specified by id or name. |
|
voiprestart | Restarts the VoIP software of the camera. |
Please note that the actions "setrs232sig", "sigouthigh", "sigoutlow"have become obsolete and are deprecated. They are still supported for legacy purposes.